Komercialni sistemi HVAC:izbira najboljše opreme za hlajenje in ogrevanje za vašo stavbo

Komercialni sistemi HVAC so ključni vidik vsake zgradbe. Vzdrževanje temperature, vlažnosti, kakovosti zraka in še veliko več je odvisno od dobro delujočega sistema HVAC. Če ne uspe, se lahko soočite z nesrečno izgubo dohodka, popravil in strank. Zaradi tega je izjemno pomembno, da so ti sistemi dobro vzdrževani in nihajoči skozi vse leto.

Zaradi velikega obsega so komercialni sistemi ogrevanja in hlajenja lahko zapleteni in težko razumljivi. Tukaj je preprosta razčlenitev vsega, kar morate vedeti, da bodo komercialne klimatske naprave v odličnem stanju!

Ključne komponente komercialnih sistemov HVAC

Obstaja več različnih vrst komercialnih ogrevalnih in hladilnih sistemov, vendar imajo vsi naslednje bistvene komponente:

1. Klimatska naprava

Ta del komercialnega sistema HVAC je odgovoren za zniževanje ali zvišanje temperature v zgradbi s sodelovanjem z drugimi podsistemi.

2. Krmilnik zraka

Regulator zraka izpihuje ohlajen ali ogret zrak v zgradbi in ga nato vrne nazaj v sistem. Ima uparjalne tuljave s hladilnim sredstvom in puhalo.

3. Kompresor

To je zelo pomemben del sistema HVAC. Spreminja prostornino, gostoto in temperaturo hladilnega sredstva.

4. Kondenzator

Kondenzator sprejme hladilno sredstvo iz kompresorja in ga spremeni v tekočino. Ta služi kot izmenjevalnik toplote sistema HVAC. Pri hlajenju odvaja toploto iz vaše stavbe, pri ogrevanju pa zbira toploto od zunaj.

5. Toplotni ekspanzijski ventil

To ohladi tekoče hladilno sredstvo, ki se črpa nazaj v tuljave.

6. Terminalne enote

Te enote nadzorujejo količino zraka, ki vstopa v vsako cono skozi kanale. Imajo tudi zračne filtre, ki preprečujejo umazanijo in ostanke zraka.

7. Termostat

Vaš sistem HVAC signalizira, naj proizvede hladen ali vroč zrak glede na nastavljeno temperaturno območje. Komercialne zgradbe imajo lahko več termostatov nameščenih v različnih prostorih.

8. Kanal

Večina komercialnih kanalskih enot ima kanalski sistem, ki pomaga pri distribuciji klimatiziranega zraka po stavbi.

9. Hladilniki

To so hladilni elementi velike komercialne enote HVAC. Hladilniki odvajajo toploto iz tekočine, ki teče skozi cevi v zgradbi. Nekatere enote HVAC imajo zračno hlajene hladilnike, medtem ko imajo druge vodno hlajene hladilnike.

Vrste komercialnih sistemov HVAC

Obstaja več možnosti izbire komercialnega sistema ogrevanja in hlajenja. Vsaka vrsta ima svoje prednosti in slabosti, zato je pomembno, da pred odločitvijo upoštevate svoje posebne potrebe. Zapisovanje vseh podrobnosti je lahko precej zmedeno, zato je vedno dobro, da se po zožanju možnosti pogovorite s strokovnjakom. Oglejmo si podrobno vse tipe komercialnih klimatskih naprav:

1. Pakirana klimatska naprava

Komercialna pakirana klimatska naprava je podobna okenski klimatski napravi, vendar veliko večja. Te komercialne klimatske enote imajo večjo zmogljivost ogrevanja in hlajenja, ki sega od 3 do 15 ton.

Pakirane klimatske naprave imajo zasnovo vse v enem, ki vsebuje kondenzator, kompresor, ventilatorsko tuljavo in uparjalnik. These are usually mounted outside or on roofs in buildings such as senior homes, hospitals, and condominiums. The conditioned air is spread throughout the building by a network of ducts hidden in the ceiling.

PROS	CONS
Low installation costs	Limited life span
Simple maintenance requirements	High refrigerant costs
Quiet operation	High sensitivity to blocked air filters

2. Split System

As the name suggests, a split system has two parts; an indoor and an outdoor unit. Commercial split air conditioners further have two types:

• Single-Split System

This is an affordable, energy-efficient commercial heating and cooling option for small buildings, cafes, server rooms, or shops. They are ideal for individual room cooling but can be used in combinations to condition multiple rooms. However, because each air conditioning unit needs a separate outdoor unit, this clutters the external space of the building.

PROS	CONS
Ideal for small spaces	Multiple outdoor units clutter the space
Energy efficient	Not suitable for large buildings
Can be used as an additional source of air conditioning
Less expensive to install

• Multi-Split System

In a multi-split system, one outdoor unit operates multiple inside indoor units. These systems require extensive pipework and, if not installed properly, can reduce the efficiency of your system.

Multi-split system is better suited for medium-sized buildings like restaurants or retail shops.

PROS	CONS
It takes up less space	Higher installation cost
Preserves the building’s external appearance	Lots of pipework is needed
Ductwork isn’t required	Not suitable for small commercial spaces

3. Heat Pump

A heat pump heats or cools a building by transferring heat outside in the summers and inside in the winters. Since heat pumps do not generate heat, they can efficiently maintain comfortable temperatures. However, they’re not suitable in areas with extreme climate conditions.

Heat pumps can be ducted as well as ductless. Ducted heat pumps are suitable for larger areas but require extensive ductwork. Ductless heat pumps are ideal for supplemental or individual room cooling.

PROS	CONS
Most energy efficient	Not suitable for colder climates below 40 degrees
Require less maintenance	Installing/cleaning ducts can be a hassle
Do not produce carbon monoxide
Great for large and medium-sized buildings
Quick installation if ductwork is installed

4. Variable Refrigerant Flow (VRF) or Variable Refrigerant Volume (VRV)

VRF or VRV is a ductless system that uses the minimum energy to attain the required temperature. It varies the refrigerant volume to match the precise requirements of a building. If the system requires more cooling, more refrigerant will enter the pipes. Because of varied compressor speed and no duct involvement, these units are considered much more efficient than the traditional HVAC units. Its mechanism results in lower energy costs and the long-term sustainability of the unit.

PROS	CONS
Saves energy bills	Expensive equipment
Suitable for spaces with variable cooling or heating requirements	Takes a lot of space
Better humidity and temperature control	Backup condenser is required in case of a malfunction

Make Any Commercial Cooling &Heating Equipment Smart

Maintaining a consistent temperature throughout your building while considering the different needs of the inhabitants can be quite challenging and time-consuming. But not if you pair your commercial HVAC system with a smart thermostat (for ducted) or a smart AC controller (for ductless).

These smart devices allow you to automate your building’s climate. You can set schedules and have different settings for different days of the week. Moreover, you can create zones and set customizable temperature regions within the building.

With all the next-gen features like temperature/humidity-based triggers, geofencing, usage history, and much more, you can save up to 25% on energy bills.

How to Choose a Suitable Commercial HVAC System?

When it comes to choosing an air conditioning unit for commercial use, the following factors are important to consider:

• Building design
• Energy efficiency
• Climate conditions
• Air quality

The first step is to determine the heating and cooling requirements of the space. This will vary depending on the type of business and the number of people that occupy the building.

Next, consider the building’s energy efficiency. In general, newer buildings are better insulated and require less energy to heat and cool. However, older buildings can often be retrofitted with energy-efficient windows, doors, and insulation.

Climate conditions are also an important consideration. For example, mini-splits won’t work when heat waves hit if the building is in an extremely hot and humid climate.

Finally, air quality is another important factor to consider. Indoor air quality can be affected by a number of factors, including off-gassing from building materials, cleaning products, and office equipment. To ensure proper airflow and filtration, it’s important to choose an HVAC system that is sized appropriately for the space and ventilation needs.

Make your AC Smart

Cielo Breez Plus

Industry Best in Class Smart AC Controller with Local Controls

Shop Now$114$149

Cielo Breez Eco

Best Valued Smart AC Controller in White

Shop Now$73$99

Cielo Breez Eco

Best Valued Smart AC Controller in Black

Out of Stock$68$99

Is Commercial Building HVAC System Maintenance Worth the Expense?

A typical commercial building HVAC system is a complex network of air conditioning components, including air ducts, air filters, coils, and blowers. To keep this system running smoothly, it is important to perform regular maintenance.

Usually, commercial HVAC maintenance may be too costly, but it saves a lot in the long run. For example, regular maintenance can extend the durability of your equipment. Additionally, properly maintained HVAC systems tend to have lower operating costs, so you’ll save money on your energy bills each month. Finally, regular maintenance can help ensure the comfort of your tenants or customers by keeping the temperature and humidity always at a comfortable level. When you weigh all the factors, it’s clear that investing in maintenance for your commercial HVAC system is a thrifty decision.

Here are the most important things to tick off your regular HVAC maintenance list:

• Inspect air filters and clean or replace them as needed
• Clean the condenser and evaporator lines
• Check for blockages in the air ducts
• Inspect the drain lines to ensure they’re not clogged
• Test the thermostat readings to make sure it’s accurate

Additionally, follow these detailed commercial HVAC maintenance tips to ensure your system runs smoothly and efficiently throughout the year.

How Do Commercial Air Conditioners Differ From Residential Systems?

When it comes to climate control, commercial HVAC systems are in a class of their own. These heavy-duty systems are designed to cool or heat large spaces quickly and efficiently.

Here’s a closer look at some of the key ways that commercial units differ from residential HVAC systems.

	Commercial HVAC System	Residential HVAC System
Size	Larger	Smaller
Operating Power	More powerful	Less powerful
Placement	Roofs or utility rooms	Inside homes
Cost	Less expensive	More expensive
Maintenance	Requires less maintenance	High maintenance
Drainage	Complex	Simple

Commercial HVAC systems are a vital part of any business, and it’s important to understand the different types and how they work before making a purchase. By considering factors such as size, usage, and climate, you can choose the best system for your needs and ensure that your employees or customers stay comfortable all year long. Maintenance is important for any commercial air conditioner, but the cost-benefit analysis can be tricky. However, carrying out regular AC tune-ups can save you money in the long run.