Seznam tovarniško privzetih gesel za DVR in NVR (2022)

V tem članku bodo navedena privzeta uporabniška imena in gesla niza varnostnih sistemov . Te poverilnice za prijavo so tiste, ki jih snemalniki/kamere dobijo iz proizvodne linije.

Če ste vi ali nekdo z dostopom do vašega sistema spremenili katero koli privzeto vrednost, privzete poverilnice ne bodo več veljale, razen če zadevno opremo najprej »ponastavite«.

Seznam privzetih gesel za DVR in NVR

Blagovna znamka	Uporabniško ime	Geslo	Privzeti naslov IP
3xLogic	skrbnik	12345	192.0.0.64
Akti	skrbnik	skrbnik	192.168.0.100
American Dynmics	skrbnik	skrbnik	192.168.1.168
Arecont Vision	skrbnik	Brez nastavitve gesla	Ni privzeto / DHCP
Avigilon	skrbnik	skrbnik	Ni privzeto / DHCP
Os	root	brez nastavljenega gesla	Ni privzeto / DHCP
Basler	skrbnik	skrbnik	192.168.100.x
Bosch	storitev	storitev	192.168.0.1
Bosch Dinion	skrbnik	Ni nastavljenega gesla	192.168.0.1
Brickcom	skrbnik	skrbnik	192.168.1.1
CBC Ganz	skrbnik	skrbnik	192.168.100.x
Cisco	ni privzeto	brez nastavljenega gesla	192.168.0.100
CNB	root	skrbnik	192.168.123.100
Costar	root	root	neznano
Dahua	skrbnik	skrbnik	192.168.1.108
Dr	skrbnik	1234	192.168.0.200
DVTel	Skrbnik	1234	192.168.0.250
DynaColor	skrbnik	1234	192.168.0.250
Flir	skrbnik	fliradmin	192.168.250.116
Foscam	skrbnik	pustite prazno	neznano
GeoVision	skrbnik	skrbnik	192.168.0.10
Grandstream	skrbnik	skrbnik	192.168.1.168
GVI	Skrbnik	1234	192.168.0.250
HIKVision	skrbnik	12345	192.0.0.64
Honeywell	skrbnik	1234	brez privzetka/DHCP
IOImage	skrbnik	skrbnik	192.168.123.10
IPX-DDK	root	Admin ali skrbnik	192.168.1.168
IQInvision	root	sistem	brez privzetka/DHCP
JVC	skrbnik	Model # kamere	brez privzetka/DHCP
VideoIQ	nadzornik	nadzornik	brez privzetka/DHCP
Varnost LTS	skrbnik	12345	192.0.0.64
Marčeva omrežja	admin	leave blank	unknown
Merit Lilin	Camera	admin pass	No Default / DHCP
Merit Lilin	Recorder	admin / 1111	No Default / DHCP
Messoa	admin	Model# of camera	192.168.1.30
Mobotix	admin	meinsm	No Default / DHCP
Northern	admin	12345	192.168.1.64
Panasonic	admin	12345	192.168.0.253
Panasonic	admin1	password	192.168.0.253
Pelco	admin	admin	no default/DHCP
PiXORD	admin	admin	192.168.0.200
PiXORD	root	pass	192.168.0.200
QVIS	admin	1234	192.168.0.250
Samsung	root	4321 / admin	192.168.0.200
Samsung	admin	4321 / 1111111	192.168.1.200
Sanyo	admin	admin	192.168.0.2
Sentry360	Admin	1234	192.168.0.250
Sony	admin	admin	192.168.0.100
Speco	root	root	192.168.1.7
Speco	admin	admin	192.168.1.7
StarDot	admin	admin	no default/DHCP
Starvedia	admin	no set password	no default/DHCP
Toshiba	root	ikwb	192.168.0.30
Trendnet	admin	admin	192.168.10.1
UDP	root	unknown	unknown
Ubiquiti	ubnt	ubnt	192.168.1.20
W-Box	admin	wbox / 123	192.0.0.64
Wodsee	root	leave blank	unknown
Verint	admin	admin	no default/DHCP
Vivotek	root	no set password	no default/DHCP

Most Popular CCTV Brands

Acti default username/password

• Username:Admin/admin
• Password:12345/123456
• IP address:192. 168.0.100

Arecont Vision default username/password

Arecont does not have a default password, but you can reset it to factory settings. Follow these steps:

1. Access the camera’s web interface by typing the IP in your web browser.
2. Under the Administration or System tab, click on Restore to Factory Default.
3. Once the camera reboots, all settings on the camera will be restored to factory default.

AXIS default username/password

For an old system:

• Username:Root
• Password:Pass
• IP address:192.168.0.90

The new generation AXIS cameras have a resetting sequence:

1. Remove the Ethernet cable.
2. Press and hold the control button and insert the Ethernet cable again while holding the control button.
3. Hold the control button until the amber lights turn on.
4. Then release the button.
5. Wait for about 1 minute.
6. When the amber lights turn into the green lights your camera is reset and your password as well.

BOSCH default username/password

For old models:

• Username:service
• Password:service
• IP address:192.168.0.1

For new models:
You can reset the camera by pushing the reset button for about 7 seconds. Or you can reset the NVR by removing the battery on the mainboard (not recommended, at your own risk).

DAHUA default username/password

• Username:admin
• Password:admin
• IP address:192.168.1.108

Local Account:

• Username:888888
• Password:888888

GEOVISION default username/password

• Username:admin
• Password:admin
• IP Address:192.168.1.108

HIKVISION default username/password

For old models (before firmware 5.3.0):

• Username:admin
• Password:12345
• IP Address:192.0.0.64

For new models, you can reset passwords via the SADP tool. Please click the link below and follow the instructions.

LTS Security default username/password

• Username:admin
• Password:12345 or 123456
• IP Address:192.0.0.64

LTS equipment is Hikvision re-branded.

Messoa default username/password

• Username:admin
• Password:1234 or model number of camera or
• IP address:192.168.1.30

Mobotix default username/password

• Username:admin
• Password:meinsm

SAMSUNG Techwin default username/password

For old models:

• Username:admin
• Password:111111 or 1111111

For new models:

• Username:admin
• Password:4321
• IP Address:192.168.1.200

SONY default username/password

• Username:admin
• Password:admin
• IP Address:192.168.0.100

Speco default username/password

For old models:

• Username:root or admin
• Password:root or admin

For new models:

• Username:admin
• Password:1234
• IP Address:192.168.1.7

Ubiquiti default username/password

• Username:ubnt
• Password:ubnt
• IP Address:192.168.1.20

Vivotek default username/password

Noben. You can choose your own password after setup. If you want to reset it.

1. Press and hold down the reset button for at least 1 minute.
2. Power on the camera until the red light flashes rapidly.

Now your camera is back to factory default without any password.