Kako združiti in ponastaviti JBL slušalke

Vedno več ljudi izbira udobne brezžične slušalke namesto tradicionalnih žičnih. Takšne slušalke lahko povežete s pametnim telefonom ali drugimi napravami prek povezave Bluetooth, če to podpirajo.

V tem članku si bomo ogledali, kako lahko seznanite slušalke JBL z večino naprav in kaj storiti, ko povezava Bluetooth ne deluje. JBL izdeluje nekaj najboljših zvočnikov, slušalk in ušesnih čepkov, vendar je njihovo združevanje lahko težavno. Naj vam vse poenostavimo.

Splošna pravila

• Na pametnem telefonu mora biti omogočen ustrezen modul za brezžično povezavo (Bluetooth, NFC).
• Slušalke bodo morda morale aktivirati način seznanjanja.
• Naprave naj bodo v vidnem polju na razdalji največ 10 m.

Kako združiti zvočnik JBL z vašo napravo

Če svoje slušalke JBL Bluetooth povezujete prvič s telefonom ali računalnikom, morate izvesti postopek združevanja, tako da telefon in slušalke drug drugemu posredujejo kodi za preverjanje pristnosti in začnejo delovati v paru.

Brez seznanjanja vaših naprav vaše slušalke ne bodo delovale s telefonom in vaš telefon ne bo videl slušalk na seznamu razpoložljivih naprav.

V veliki večini primerov morate za vklop načina seznanjanja na slušalkah držati gumb za vklop do 5 sekund.

Če ste vse naredili pravilno, bo indikator na slušalkah začel utripati. To pomeni, da je pripomoček v načinu seznanjanja. Zdaj pa poglejte zaslon svojega telefona.

Ime slušalk, ki jih želite povezati s telefonom, se mora prikazati na zaslonu vašega telefona v razdelku »Razpoložljive naprave«.

Ko vidite ime slušalk, kliknite nanj. Seznanjanje obeh naprav se bo začelo samodejno. Včasih boste morda videli kodo za seznanjanje in morate potrditi, da je seznanjanje dokončano.

Več podrobnosti je pojasnjenih spodaj za različne naprave.

Kako ušesne slušalke JBL povezati s telefonom Android

Postopek za povezavo vaših brezžičnih slušalk JBL s pametnim telefonom je zelo preprost.

Sledite spodnjemu vodniku za povezavo JBL z vašo napravo Android;

1. Ušesne slušalke vklopite tako, da pritisnete gumb za vklop na ohišju ali jih odstranite iz polnilne škatle.
2. Ušesne slušalke JBL prestavite v način Bluetooth. Če želite to narediti, pritisnite in držite desni ušesni čep 5 sekund.
3. Pojdite v meni telefona in poiščite oznako Bluetooth.
4. Videli boste seznam naprav, ki so v dosegu signala Bluetooth. Na tem seznamu poiščite ime modela vaših slušalk JBL:največkrat je to ime, ki ga proizvajalec daje svojim pripomočkom.
5. Kliknite na ime naprave – pametni telefon bo poskušal vzpostaviti povezavo z njo. Po tem bo najverjetneje zahteval geslo (kodo za seznanjanje).
6. Najbolj priljubljeno tovarniško geslo je 0000. Toda proizvajalec slušalk lahko zagotovi drugo:v tem primeru ga poiščite v priročniku za uporabo.
7. Po vnosu pravilne kode za seznanjanje se bosta napravi povezali prek povezave Bluetooth. Če ima vaš model JBL indikatorsko lučko, bo zasvetila ali začela utripati.

Če so dejanja izvedena pravilno, se na zaslonu pametnega telefona prikaže tudi »Povezano« ali znak povezave Bluetooth na vrhu vaše naprave.

Kako ušesne slušalke JBL povezati s telefonom Samsung

Algoritem je enak kot pri povezovanju slušalk s katerim koli pametnim telefonom Android, kot je opisano zgoraj.

Kratka navodila za povezavo s Samsungom:

1. Vaše brezžične JBL slušalke preklopite v način združevanja.
2. Pojdite na nastavitve Bluetooth v telefonu (Bluetooth mora biti vklopljen).
3. Find the name of the headphones you want to connect to in the list of available devices.
4. Click on your device and wait a few seconds, after which the connection will be. established, and the headphones will be connected to your Samsung device.

How To Connect JBL Earbuds To An iPhone

Follow the guidelines below step by step to connect your JBL earbuds to your iPhone:

1. Turn your earbuds on by pressing the power button on the case or by removing them from their charging box whichever the case may be.
2. Put your JBL earbuds in Bluetooth mode. To do this, press and hold the right earbud for 5 seconds.
3. Turn on the iPhone.
4. Open the settings of the mobile device.
5. Find the Bluetooth tab, open it and activate this option.
6. Wait until the slider next to ” Other devices ” stops spinning;
7. When the search is over, click on the column name to connect to it.

If the actions are performed correctly, the synchronization will end in a few seconds and your iPhone display will show “ Connected ”.

Note:

• After the first pairing, subsequent connections will be made automatically.
• JBL Tune 120 TWS earbuds have the ability to use one earbud as a Bluetooth headset. For this, the right earpiece is used, which has a built-in microphone.

How to Pair The JBL Tune 120

Before you can use the JBL tune 120 earbuds you have to first pair the right and left earbuds to each other. To do this, follow the short instructions below;

1. Remove the right and left earbuds from the charging case.
2. Press on the left and right earbuds 3 times.
3. They should be paired after doing this.

JBL Earbuds Not Connecting

Why won’t my JBL headphones or earbuds connect to Bluetooth from my device? Despite the simple connection algorithm, users occasionally encounter problems when trying to connect their phones to JBL wireless headphones. The reasons are usually trivial:we have compiled a list of the most popular reasons.

Headphones are off or not in pairing mode

It is banal but true:many forget to turn on the “ears”, and the smartphone, and of course, cannot find them among the available devices. This often happens with simple model JBLs without light indication.

The headphones are out of pairing mode

As a rule, the connection mode works only for a certain time. If you’ve been messing around with your smartphone for too long and it’s time out, chances are you won’t be able to find the device on the available list. Pay attention to the indicator light and try to see if the pairing mode is activated.

The distance between your device and headphones is too wide

For a reliable connection, two gadgets should be at a distance of less than 10 meters and in a line of sight. If you try to connect from the next room through a couple of walls, you may fail.

The headphone name is weird

This is often encountered by those who bought cheap or fake wireless JBL from a non-trusted source. In this case, it will be difficult for you to find the device in the Bluetooth list when connecting.

However, the solution to this is simple; turn off the headphones, press the “Search” or “Refresh” button on your smartphone. One of the devices should disappear.

Turn on the gadget again and update the list – watch the appearance of a new line. This should be your device.

The headphone battery is dead

Another popular scenario for those who have been messing around with the connection for too long.

Many models do not warn you in any way that the battery is low. In others, the “alarm indicator” is activated, that is, the LED starts blinking red or with an increased frequency.

You have rebooted your smartphone

If you turned off your phone (for example, when boarding an airplane) or rebooted it (for example, after an update), you will have to reconnect.

Your JBL Bluetooth devices will not automatically pair. The process of pairing is the same as described earlier.

If any of this doesn’t work, try troubleshooting or resetting your earbuds. This is explained below.

Troubleshooting Your JBL Headphones

If your JBL speaker won’t connect to your phone or device, try the suggestions below. You don’t have to do them all at once, perhaps restarting your JBL or phone will help you right away.

1. Reboot your smartphone and headphones/earbuds.
2. Turn Bluetooth off on your smartphone and also remove your earbuds from Bluetooth mode.
3. Reset your JBL headphones to the factory settings (see the section below for instruction).
4. Charge devices to 100% and reconnect;
5. At the time of synchronization, keep the phone and speaker as close to each other as possible.

If, after all the above steps, the earbud still does not connect, we recommend contacting the service or handing over the JBL speaker under warranty, if it is still valid.

Factory Reset Your JBL Headphones

It is important to note that the method to factory reset an earbud is different from the steps for resetting a headphone.

To perform a factory reset of the JBL Tune 120 TWS earbuds (hard reset), place both earbuds in the case, then press and hold the button on the right earbud for 5 seconds.

The headphone indicator will turn off and then light up again. After that, all settings will be reset.

However, if you want to factory reset JBL Tune 220 TWS headphones, follow the listed instruction;

1. korak . Disconnect the JBL Tune 220 TWS earbuds from your phone.

Step 2 . Place both earbuds in the charging case.

Step 3 . Remove the right earbud from the case.

Step 4 . Press and hold the removed earbud for 10 seconds. This will reset the JBL Tune 220 TWS earbuds to factory settings.

Step 5 . Delete the headphone Bluetooth data on your phone.

Step 6 . You can now reconnect the JBL Tune 220 TWS to your phone.