Kako povezati avtoradio iz nič?

Ste že kdaj potovali z odličnim avtomobilom, vendar ste imeli glasbo nizke kakovosti? Na žalost je to težava pri večini avtomobilov.

Na splošno ima veliko avtomobilov tovarniško vgrajene glavne enote, ki niso na ravni. To je zato, ker večina proizvajalcev avtomobilov ne vloži največ truda v kakovost zvoka in avdio opreme avtomobila.

Najpogostejša in najboljša odločitev je zamenjava avtomobilske glavne enote z dodatnim radiem, toda kako ožičiti avtoradio iz nič? Ugotovimo.

Prvi korak pri ožičenju avtoradia je odstranitev kabelskega snopa in odklop žic, ki povezujejo zvočnike in napajanje. Nato priključite žice na nov kabelski snop ali adapter kabelskega snopa in ga priključite na novi radio. Ko je povezan, preizkusite avtoradio in ga, če deluje pravilno, postavite na armaturno ploščo.

Celoten postopek zamenjave vključuje namestitev in ožičenje avtoradia. V tem članku vam bom pokazal vodnik po korakih za ožičenje avtoradia.

Kako iz nič povezati avtoradio. Obsežen vodnik.

Tako kot drugi postopki, upoštevanje pravilnih navodil za ožičenje stereo naprave zagotavlja visokokakovosten zvok v vašem avtomobilu.

Vzemite si čas, natančno preberite vsak korak in ukrepajte v skladu s tem. Poskrbite, da ne boste delali v naglici in bodite veliko pozorni na delo.

Katera orodja so potrebna za ožičenje avtoradia?

Preden karkoli naredite z avtoradiem, morate pripraviti nekaj osnovnih, a potrebnih orodij.

Verjetno imate vse v svoji garaži, če pa ne, sem dodal Amazonove povezave do orodij, ki jih uporabljam, in zadovoljen sem s kakovostjo:

• Digitalni multimeter.

• Odstranjevalci žice.

• Krimperji.

• 9-voltna baterija ali tester za zvočnike.

• Električni trak.

1. korak:Odstranite radio in odklopite kabelski snop

Najprej odstranite stari stereo iz armaturne plošče in odklopite kabelski snop. Na tej točki boste morda potrebovali adapter za ožičenje, odvisno od novega radia za pomoč pri povezovanju vašega novega avtoradia z obstoječo sponko v avtu.

Adapter za ožičenje pomaga pri povezovanju edinstvenih avtomobilskih stereo naprav s standardnim priključkom DIN iz avtomobila in preprečuje kakršne koli napačne povezave.

2. korak:Odklopite baterijo

Ko izvajate postopek ožičenja, boste morali delati na električnem sistemu.

Zato obstaja možnost električnega udara, zato je priporočljivo, da odklopite baterijo, preden začnete postopek povezovanja žice.

V večini avtomobilov boste akumulator našli pod pokrovom motorja, v nekaterih redkih primerih pa je nameščen v zadnjem delu vozila.

Ko poiščete baterijo, z ročnim ali nasadnim ključem sprostite črni kabel z negativnega pola baterije.

Razmislite o tem, da bi izgubili vijak in povlecite kabel navzdol na stran baterije, da zagotovite, da se ne dotika pozitivnih žic. Če ne odklopite akumulatorja, lahko poškodujete sebe ali električno opremo avtomobila.

3. korak:Ovijte vse povezane žice

Pomen tega početja je zavarovati njihove povezovalne točke.

Ko preverite vse žice in jih povežete z avtomobilom, je nujno, da so povezave trajne.

Prepričajte se, da v avtoradiu ni golih žic, za deformacijo žičnih povezav pa lahko uporabite električni trak .

Za ovijanje žic lahko uporabite druge načine, vendar je uporaba traku najlažja, najcenejša in najpogostejša metoda, ki jo uporabljajo mnogi ljudje.

3. korak:preizkusite avtoradio

After making the connections and securing them, you have to reconnect the battery to be able to test the stereo before placing it permanently in the dashboard.

It is advisable to install the car radio after checking it is working perfectly. First, however, you need to check its all functions, including speakers connections.

Finding something that is working incorrectly means the wires are not connected right, and often mistake is wrong connection of the speaker wires.

Step 4:Place the Wires Harness Into the Dashboard

After ensuring that all of your connections are tight and secure, it’s now time to install wiring inside the dash.

This includes connecting an often-forgotten antenna wire from car radio signal reception equipment so you can enjoy clear communications while driving!

You have to remember that there should be enough space for your radio in the dashboard, so make sure all wires are pushed into the dashboard.

This way, the stereo won’t get stuck when trying to move or remove from its position later on without damaging anything!

Step 5:Place the Car Radio Into Its Place

In most cars, there is an opening inside the dash where the car radio should be placed.

While installing the car radio, make sure it perfectly fits into the slot, and there are no extra wires that would block free movement.

If you feel some resistance while pushing the radio, never force it with too much pressure to its position. Otherwise, you can damage the wiring connectors at the backside.

In this case, an adaptor is very helpful at sliding the car radio properly in its correct position. An adaptor is available at any electronic store or auto parts store.

Step 6:Secure the Car Radio in Its Position

You can secure a car radio into two main methods.

• One of them is for the car radios that need spring clips. Once the stereo is locked at the correct position, the clips close and you can hear a click sound.

• The other one that is less common, involves brackets and bolts that need proper fixation. Bolting the radio permanently helps to secure it in the place.

Step 7:Install Dashboard

This is the final step of the wiring process and involves assembling every piece of the trim and the plastic clips.

At the same time, be careful to avoid the damage of any plastic parts and take time to check if the overlapped pieces have been correctly layered.

If you come across some plastic parts that have been broken, you can use hot glue to secure them.

However, using glue is not highly recommended since the plastic parts you fix can become difficult to remove in the future.

If the entire rim piece has been broken completely, the only option you have is to buy a replacement.

How to Test Car Radio Wire for Their Right Connections

All wires have to be in good condition and connected to the radio without interruptions.

Below I listed a few simple checks you can do to make sure the stereo’s connection is correct:

Constant wire

This wire comes with 12 volts, and it supplies power directly from the battery.

To test if it is working, the first thing you should do is put off your ignition. Afterward, ground the black wire, pick up the red meter probe and connector, and touch it with the constant yellow wire.

The constant wire should give the reading up to 12 volts with a 0.5V difference.

Speaker wire

The simplest way to test the speaker wires is to use a 9-volt battery. You can also use a multimeter to test the speakers but make sure you set it to resistance before testing.

Accessory Power

Turning off the ignition makes the wire show a zero volt reading at a meter. Upon turning it on, it reads 12 volts and 0.5 volts.

Ground wire

Identifying the ground wire is straightforward after identifying the constant wire. Then, after proper testing, the ground wire is connected to the black wire.

Note that it is necessary to begin attaching a red meter probe with constant wire and later a black meter probe with the wire you are testing.

If the reading on the meter is similar to the constant wire testing, that is the ground wire.

Frequently Asked Questions (FAQs)

Where Is the Ignition Wire Located?

Depending on the car, the ignition switch harness is located inside the steering wheel column on either the left or right side.

The ACC wire is the one often 18 gauge yellow or pink. Installing this wire at a local electrical specialist can help you ensure the installation.

What Happens if You Do Not Ground a Car Stereo?

It is impossible to operate a car stereo without a proper ground wire installed.

The correct ground connection allows your radio to work perfectly without malfunctioning issues when the car is on.

How Can I Tap the Wires When Wiring a Car Stereo Without the Harness Clip?

The best solution is to look at your car’s electrical manual. However, if the manual is unavailable, you have to trace every wire.

Using a multimeter will be a good idea in this task. Since car electrical systems can be tricky to manage, do not attempt to play with the car’s electrical system without basic knowledge.

Zaključek

You have no reason to stay in an excellent car with a poor music system with the above guides.

Remember, adding a new car radio in your car is a great way to breathe new life into your vehicle. However, for the stereo to work at its own best, you have to follow the installation and wiring process.