Kako povezati avtoradio Pioneer z iPhoneom
Avtoradio je večnamenska elektronska naprava, ki v enem ohišju združuje zvočnik, ojačevalnik in radijski sprejemnik.
Avtoradio Pioneer obstaja v različnih modelih in njihova povezava z iPhonom se lahko razlikuje glede na točen model, ki ga imate, in njegove funkcije. Torej, kako lahko povežete avtoradio Pioneer z iPhoneom? Ugotovimo.
Če želite avtoradio Pioneer povezati z iPhonom, lahko brezžično sinhronizirate prek Bluetootha iz iPhona ali povežete avtoradio Pioneer s funkcijo CarPlay na vašem iPhonu ali pa se enostavno povežete neposredno s podatkovnim kablom. To pomeni, da lahko avtoradio Pioneer povežete z iPhoneom na tri različne načine.
V spodnjem članku vam bom korak za korakom pokazal, kako z različnimi metodami povezati avtoradio Pioneer z iPhoneom.
Povezovanje avtoradio Pioneer z napravo iPhone prek povezave Bluetooth
Ta metoda je podobna povezovanju vseh telefonov, ne glede na to, ali gre za iPhone ali Android. Toda preden se poglobite v korake, se prepričajte, da imata vaš iPhone in stereo vklopljena funkcija Bluetooth.
Prav tako morate potrditi, da nobeden od njih še ni povezan z drugo brezžično napravo ali sistemom, sicer ga ne boste mogli združiti s svojim Pioneer stereo sistemom.
1. korak
Preden začnete, poskrbite, da omogočite Bluetooth na vašem iPhoneu in avtoradio pioneer. Za aktiviranje Bluetooth stereo naprave lahko uporabite dva načina:
- iz nastavitev Bluetooth
- uporabi možnost klica
Zdaj, ko se premikate po kateri koli od možnosti, boste opazili, da sta ikona za nastavitve Bluetooth v meniju z nastavitvami in ikona za nastavitve v območju Dnevniki telefona videti zbledeli.
Zbledele ikone pomenijo, da v tem trenutku ni mogoče omogočiti nobene možnosti, in to je nekaj, kar morate popraviti, če želite nadaljevati s seznanjanjem.
2. korak
- Če želite izbrati obledelo možnost, morate prestavo avtomobila preklopiti v način parkiranja. To je tako, ker je veliko sodobnih vozil zasnovanih s stereo funkcijami, na katere vpliva prestava avtomobila.
Možnosti, ki vam omogočajo povezavo iPhona z Bluetooth stereo naprave, ne morejo delovati, ko vaš avto ni v načinu parkiranja, vendar je to samo za samodejni menjalnik.
Zamisel za to je, da se vozniki ne motijo s povezavo Bluetooth, medtem ko se njihov avto premika, in se izogibajte kakršnim koli manipulacijam z radiem med vožnjo.
Možnost Bluetooth lahko omogočite samo pred začetkom potovanja ali po parkiranju vozila, če se že premika.
- Ko nastavite možnost zobnika v način parkiranja, boste videli, da so zbledele možnosti povezave v meniju z nastavitvami in ikona telefona zdaj na voljo za uporabo.
- Zdaj lahko vklopite Bluetooth vašega avtoradio sistema Pioneer in Bluetooth vašega iPhone-a v njegovih nastavitvah povezave.
3. korak
Ko ste uspešno aktivirali povezavo Bluetooth na telefonu in avtoradio, ju morate zdaj seznaniti. iPhone samodejno poišče razpoložljive naprave v bližini za povezavo v nastavitvah Bluetooth.
Izberite avtomobilsko stereo napravo s ponujenega iskalnega seznama, da začnete postopek seznanjanja.
Nenadoma boste videli sporočilo, ki prikazuje geslo za seznanjanje, ki bi moralo biti enako na stereo napravi in vašem iPhoneu. Potrdite, da se ujemata, tako da potrdite možnost, da ju združite med seboj.
4. korak
Nazadnje morate preveriti, ali so naprave sinhronizirane. To je običajno za preizkus, ali se vaš iPhone in avtoradio nista samo združila, ne da bi bila trenutno povezana (sinhronizirana).
Potrditev, da se gesli ujemata v postopku združevanja, združi samo obe strani. Vaš telefon bo nato pozvan s sporočilom, ki zahteva, da funkciji sinhronizacije avtoradia omogočite pridobivanje informacij iz vašega pametnega telefona.
Then, you just have to select ‘Yes’ then go to your main menu or home screen, where you will see a phone-like button.
Tapping on it will display a window that searches for the device that permits data synchronization.
Since your iPhone is already connected, you should see the name in its search list and select it as it displays a window that shows your successful synchronization.
Connecting a Pioneer Car Stereo With iPhone via Carplay
You can connect a pioneer car stereo to an iPhone with the CarPlay app in the stereo and the CarPlay feature in your smartphone.
Recent models of car stereos already have the CarPlay app, so getting an iOS device in sync should be straightforward.
Step 1
The beginning of setting up your iPhone to sync with a car stereo involves you having installed the CarPlay app on your device.
If you don’t have it installed yet, quickly get into the App Store and download it to make this feature available on your phone.
Once you have the app, navigate through your iPhone’s settings to ‘General,’ where you will check for the option that shows CarPlay. Select the option as the phone takes you to another window for the features.
Step 2
Before fully applying the CarPlay feature, you have to connect your iPhone and the pioneer car stereo via Bluetooth and WiFi.
The CarPlay window now shows you that it’s searching for available devices. Head to your car stereo display and on the home screen, select the phone-like icon that opens a window searching for devices that are ready to pair.
Step 3
The pioneer car stereo should find your iPhone instantly since you have already enabled the CarPlay option to search for connectable devices.
Choose your iPhone’s name or title in the search window as it provides a pairing password for both devices, just like with Bluetooth.
In the end, you get a pop-up notification regarding allowing the pioneer car stereo to synchronize with your iPhone. Select ‘Yes’ or ‘Allow,’ which opens a window displaying the synchronization.
Connecting a Pioneer Car Stereo to Your iPhone Using Data Cable
This is likely the most straightforward method to sync an iPhone to a car stereo.
You can use a suitable data cable (cord) to directly connect your iOS smartphone by plugging it into the USB port of a vehicle’s stereo.
Typically, you can locate the port just behind the stereo system, but some Pioneer radios have the USB port in the front panel, which is helpful for this type of connection.
Step 1
You should first go to the Bluetooth options on both devices and pair them up, ensuring that none is already connected to another wireless device.
If you plug in both ends of the data cable and nothing comes up on the display screen, it usually happens when the cable used isn’t applicable for such connections or has a fault.
A successful connection with the right data cable automatically shows a synchronized window on the car stereo. This option even allows you to watch TV in your vehicle.
Step 2
On the other hand, the iPhone screen requests you to allow certain access for the car stereo via the wireless connection before showing a synchronized window.
On display, you will see information including battery, time, a cellular connection, and the home button.
The wireless connection is needed because it keeps your iPhone synchronized with the car stereo in case you need to disconnect the data cable at some point.
What to Do if a Pioneer Car Stereo Does Not Connect to iPhone With Bluetooth
There are a few ways to go about solving this kind of problem. You may come across specific error feedback in an attempt to connect like Network error, Can’t connect, or iPhone stopped.
If you see any of the above messages, below are some quick solutions:
- Inspect that the Bluetooth on your iPhone is on and still connected. Sometimes you may have to turn it off and back on to connect correctly with the pioneer car stereo.
- Try rebooting your iPhone. Doing this allows the programs that operate on your phone’s software to shut down and start afresh.
- You may need to completely restart the car’s audio system by disconnecting the car battery’s positive terminal for a few minutes.
- You should check if your iPhone has an update and apply it. Do this by navigating through Settings>> General>> Software Update. Then, download and install if an update is available.
- Try clearing your car stereo’s Bluetooth connection history and re-add it. You can do this by heading to the Bluetooth options in the phone’s settings and information (i) icon, which displays the car stereo details. Select ‘Forget This Device’ then search again to rediscover it, ensuring that the car stereo’s Bluetooth is still active.
- You probably have to force restart your iPhone by easily pressing down the sleep/wake button together with the home button until the Apple logo displays.
- Resetting the network settings of your iPhone might finally solve the issue. Be aware that doing this would also clear up your WiFi history and password(s). Complete this by navigating through Settings>> General>> Reset>> Reset Network Settings.
- If all the above settings do not fix the connectivity problem, try using a different iOS device to connect. If the other device works, you would have to consult Apple customer support. But if using another device doesn’t work either, then the issue is more likely from the car stereo, so you should contact the manufacturer.
How to Solve Music Not Playing After Connecting Car Stereo to iPhone
The reasons as to why you may experience music play issues are often traced to be caused by audio connection.
You may see that the music in your phone isn’t playing out in the car, for example, and might want to investigate the various possible problems with these solutions:
Enabling Media Audio:
The music in your phone may not play in the car if your media audio is disabled. You may also disable the HD Audio option to see if that fixes the problem.
While your phone is connected to the stereo, go to Settings>> Sound, and find out that the Play media to option shows directly below the Media Volume Slider.
Checking for Muted Function:
When you have determined that the Bluetooth connection between your phone and the pioneer car stereo is paired, you might not hear anything playing out from the speaker. Hence, you have to check that the speaker is not muted and the volume is up.
What to Do After All Troubleshooting for Bluetooth Connectivity Doesn’t Work
When you try to connect your iPhone to a pioneer car stereo using Bluetooth, and it never works despite all the solution methods above, there’s a connection issue that is preventing your smartphone from pairing up.
Nonetheless, you cannot completely rule out the likelihood that the problem is a hardware issue.
iPhones are integrated with a small antenna that enables them to pair with another Bluetooth device.
The same antenna is what’s responsible for WiFi Connectivity as well. Ergo, if your phone has probably been having issues with connecting via wireless options, then the cause could be a hardware default.
You would have to take your phone to the Apple store closest to you or a local phone technician to see to this.
Zaključek
Connecting your iPhone to a pioneer car stereo can be done in a few easy ways. It is also evident that enabling the Bluetooth option on both the phone and stereo system plays a significant role in all the available methods – you just have to pair them up at the get-go!
The convenient thing about Bluetooth connectivity is that once you take a little time to set it up and synchronize with your iPhone, you don’t have to repeat the beginning process next time.
Simply enable the Bluetooth of both devices, and you’re good to go. However, there is a possibility that you may experience issues before, during, or after the connection process.